by James Sanchez | Oct 14, 2026 | HVAC Tips
At a glance: Commercial HVAC commissioning after a retrofit verifies that new equipment, existing ductwork, and controls perform together. This guide explains what HVAC performance testing catches in Florida buildings, compares startup, test and balance, and full...
by James Sanchez | Oct 14, 2026 | HVAC Tips
At a glance: Commercial HVAC condensate drain problems start where water leaves the cooling coil: the drain pan, the trap, the drain line, a condensate pump, or the point of disposal. This guide explains how each part fails in humid South Florida buildings, compares...
by James Sanchez | Oct 14, 2026 | HVAC Tips
At a glance: Cooling tower protective coatings can return a corroded but structurally sound basin to watertight service, and they are a poor fit for towers with widespread perforation, structural section loss, the wrong capacity, or an unchanged water treatment...
by James Sanchez | Oct 14, 2026 | HVAC Tips
At a glance: Rooms that won’t cool in a commercial building usually have an airflow distribution problem that a bigger unit will not fix. This guide explains how commercial HVAC air balancing measures and adjusts airflow, compares rebalancing, repairs, controls...
by James Sanchez | Oct 14, 2026 | HVAC Tips
At a glance: Salt air is a predictable design condition for rooftop units, chillers, and cooling towers near South Florida’s coast. This guide explains how chloride attacks condenser coils, cabinets, electrical parts, and rooftop tie-downs; compares coil...
